556CRIGHTS TO DIES, MOLDS, AND FORMS556C.1Definitions.As used in this chapter unless the context requires otherwise:1“Customer” means a person who causes a molder to fabricate, cast, or otherwise make a die, mold, or form to be used for the manufacture of plastic products.2“Molder” means a person, including but not limited to a tool or die maker, who fabricates, casts, or otherwise makes a die, mold, or form to be used for the manufacture of plastic products.84 Acts, ch 1066, §1556C.2Rights to dies, molds, or forms.1In the absence of an agreement to the contrary, the customer has all rights and title to a die, mold, or form in the possession of the molder as provided in this section.2If a customer does not claim possession from a molder of a die, mold, or form within three years following the last use of the die, mold, or form, all rights and title to the die, mold, or form are transferred to the molder for the purpose of destroying or disposing of the die, mold, or form.3The molder shall notify the customer by certified mail sent to the customer’s last known address at least ninety days prior to the transfer provided in subsection 2. The notice shall indicate that all rights and title to the die, mold, or form will be transferred pursuant to this section.4If the customer does not respond in person or by mail within ninety days following the date the notice was sent or does not make other contractual arrangements with the molder for storage of the die, mold, or form the rights and title of the customer to the die, mold, or form shall transfer to the molder. After a transfer has occurred the molder may destroy or otherwise dispose of the particular die, mold, or form as the molder’s own property without liability to the customer. This section does not affect the right of the customer under federal patent or copyright law or a state or federal law relating to unfair competition.84 Acts, ch 1066, §2