09/25/2019 08:3830:96343ADC-8D55-4789-A453-0F1EDF755DEC29105PLUMBERS, MECHANICAL PROFESSIONALS, AND CONTRACTORS105.1Title.This chapter may be known and cited as the “Iowa Plumber, Mechanical Professional, and Contractor Licensing Act”.2007 Acts, ch 198, §1, 35; 2008 Acts, ch 1089, §10, 11; 2009 Acts, ch 151, §1105.2Definitions.As used in this chapter, unless the context otherwise requires:1“Apprentice” means any person, other than a helper, journeyperson, or master, who, as a principal occupation, is engaged in working as an employee of a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic systems contractor under the supervision of either a master or a journeyperson and is progressing toward completion of an apprenticeship training program registered by the office of apprenticeship of the United States department of labor while learning and assisting in the design, installation, and repair of plumbing, HVAC, refrigeration, sheet metal, or hydronic systems, as applicable.2“Board” means the plumbing and mechanical systems board as established pursuant to section 105.3.3“Contractor” means a person or entity that provides plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic systems services on a contractual basis and who is paid a predetermined amount under that contract for rendering those services.4“Department” means the department of inspections, appeals, and licensing.5“Governmental subdivision” means any city, county, or combination thereof.6“Helper” means a person engaged in general manual labor activities who provides assistance to an apprentice, journeyperson, or master while under the supervision of a journeyperson or master.7“HVAC” means heating, ventilation, air conditioning, ducted systems, or any type of refrigeration used for food processing or preservation. “HVAC” includes all natural, propane, liquid propane, or other gas lines associated with any component of an HVAC system.8“Hydronic” means a heating or cooling system that transfers heating or cooling by circulating fluid through a closed system, including boilers, pressure vessels, refrigeration equipment in connection with chilled water systems, all steam piping, hot or chilled water piping together with all control devices and accessories, installed as part of, or in connection with, any heating or cooling system or appliance whose primary purpose is to provide comfort using a liquid, water, or steam as the heating or cooling media. “Hydronic” includes all low-pressure and high-pressure systems and all natural, propane, liquid propane, or other gas lines associated with any component of a hydronic system. For purposes of this definition, “primary purpose is to provide comfort” means a system or appliance in which at least fifty-one percent of the capacity generated by its operation, on an annual average, is dedicated to comfort heating or cooling.9“Journeyperson” means any person, other than a master, who, as a principal occupation, is engaged as an employee of, or otherwise working under the direction of, a master in the design, installation, and repair of plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic systems, as applicable.10“Master” means any person who works in the planning or superintending of the design, installation, or repair of plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic systems and is otherwise lawfully qualified to conduct the business of plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic systems, and who is familiar with the laws and rules governing the same.11“Mechanical professional” means a person engaged in the HVAC, refrigeration, sheet metal, or hydronic industry.12“Mechanical systems” means HVAC, refrigeration, sheet metal, and hydronic systems.13“Medical gas piping” means a permanent fixed piping system in a health care facility which is used to convey oxygen, nitrous oxide, nitrogen, carbon dioxide, helium, medical air, and mixtures of these gases from its source to the point of use and includes the fixed piping associated with a medical, surgical, or gas scavenging vacuum system, as well as a bedside suction system.14“Medical gas system installer” means any person who installs or repairs medical gas piping, components, and vacuum systems, including brazers, who has been issued a valid certification from the national inspection testing certification (NITC) corporation, or an equivalent authority approved by the board.15“Plumbing” means all potable water building supply and distribution pipes, all plumbing fixtures and traps, all drainage and vent pipes, and all building drains and building sewers, storm sewers, and storm drains, including their respective joints and connections, devices, receptors, and appurtenances within the property lines of the premises, and including the connection to sanitary sewer, storm sewer, and domestic water mains. “Plumbing” includes potable water piping, potable water treating or using equipment, medical gas piping systems, fuel gas piping, water heaters and vents, including all natural, propane, liquid propane, or other gas lines associated with any component of a plumbing system.16“Refrigeration” means any system of refrigeration regardless of the level of power, if such refrigeration is intended to be used for the purpose of food processing and product preservation and is also intended to be used for comfort systems. “Refrigeration” includes all natural, propane, liquid propane, or other gas lines associated with any component of refrigeration.17“Routine maintenance” means the maintenance, repair, or replacement of existing fixtures or parts of plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic systems in which no changes in original design are made. Fixtures or parts do not include smoke and fire dampers, or water, gas, or steam piping permanent repairs except for traps or strainers. “Routine maintenance” shall include emergency repairs, and the board shall define the term “emergency repairs” to include the repair of water pipes to prevent imminent damage to property. “Routine maintenance” does not include the replacement of furnaces, boilers, cooling appliances, or water heaters more than one hundred gallons in size.18“Sheet metal” means heating, ventilation, air conditioning, pollution control, fume hood systems and related ducted systems or installation of equipment associated with any component of a sheet metal system. “Sheet metal” excludes refrigeration and electrical lines and all natural gas, propane, liquid propane, or other gas lines associated with any component of a sheet metal system.2007 Acts, ch 198, §2; 2008 Acts, ch 1032, §102, 202; 2008 Acts, ch 1089, §10, 11; 2009 Acts, ch 151, §2, 3; 2011 Acts, ch 100, §1, 2, 15; 2012 Acts, ch 1023, §22; 2012 Acts, ch 1026, §1, 2; 2012 Acts, ch 1138, §47, 78, 79; 2013 Acts, ch 77, §2, 3, 36; 2023 Acts, ch 19, §1572105.3Plumbing and mechanical systems board.1A plumbing and mechanical systems board is created within the department.2aThe board shall be comprised of twelve voting members as follows:1The director of health and human services or the director’s designee.2The commissioner of public safety or the commissioner’s designee.3The director of the department of inspections, appeals, and licensing or the director’s designee.4One plumbing inspector.5One mechanical inspector.6A contractor who primarily works in rural areas.7An individual licensed as a journeyperson plumber pursuant to the provisions of this chapter or, for the initial membership of the board, an individual eligible for such licensure.8An individual working as a plumbing contractor and licensed as a master plumber pursuant to the provisions of this chapter or, for the initial membership of the board, an individual eligible for such licensure.9Two individuals licensed as journeyperson mechanical professionals pursuant to the provisions of this chapter or, for the initial membership of the board, two individuals eligible for such licensure.10Two individuals licensed as master mechanical professionals pursuant to the provisions of this chapter or, for the initial membership of the board, two individuals eligible for such licensure. One of these individuals shall be a mechanical systems contractor.bThe board members enumerated in paragraph “a”, subparagraphs (4) through (10), shall be appointed by the governor and subject to confirmation by the senate.cThe terms of the two plumber representatives on the board shall not expire on the same date, and one of the two plumber representatives on the board shall at all times while serving on the board be affiliated with a labor union while the other shall at all times while serving on the board not be affiliated with a labor union.dThe terms of the mechanical professional representatives on the board shall not expire on the same date, and at least one of the mechanical professional representatives on the board shall at all times while serving on the board be affiliated with a labor union while at least one of the other mechanical professional representatives shall at all times while serving on the board not be affiliated with a labor union.3Members shall serve three-year terms except for the terms of the initial members, which shall be staggered so that three members’ terms expire each calendar year. A member of the board shall serve no more than three full terms. A vacancy in the membership of the board shall be filled by appointment by the governor subject to senate confirmation.4If a person who has been appointed to serve on the board has ever been disciplined by the board, all board complaints and statements of charges, settlement agreements, findings of fact, and orders pertaining to the disciplinary action shall be made available to the senate committee to which the appointment is referred at the committee’s request before the full senate votes on the person’s appointment.5The board shall organize annually and shall select a chairperson and a secretary from its membership. A quorum shall consist of a majority of the members of the board.6The board may maintain a membership in any national organization of state boards for the professions of plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic professionals, with all membership fees to be paid from funds appropriated to the board.2007 Acts, ch 198, §3; 2008 Acts, ch 1089, §10, 11; 2009 Acts, ch 151, §4, 5; 2013 Acts, ch 77, §4, 36; 2019 Acts, ch 85, §81; 2023 Acts, ch 19, §1573 – 1577Confirmation, see §2.32105.4Plumbing installation code — rules.1aThe board shall establish by rule a plumbing installation code governing the installation of plumbing in this state. Consistent with fire safety rules and standards promulgated by the department, the board shall adopt the most current version of the uniform plumbing code and the international mechanical code, as the state plumbing code and the state mechanical code, to govern the installation of plumbing and mechanical systems in this state. The board shall adopt the current version of each code within six months of its being released. The board may adopt amendments to each code by rule. The board shall work in consultation with the department to ensure that proposed amendments do not conflict with the fire safety rules and standards promulgated by the department. The state plumbing code and the state mechanical code shall be applicable to all buildings and structures owned by the state or an agency of the state and in each local jurisdiction.bExcept as provided in paragraph “c”, a local jurisdiction is not required to adopt by ordinance the state plumbing code or the state mechanical code. However, a local jurisdiction that adopts by ordinance the state plumbing code or the state mechanical code may adopt standards that are more restrictive. A local jurisdiction that adopts standards that are more restrictive than the state plumbing code or the state mechanical code shall promptly provide copies of those standards to the board. The board shall maintain on its internet site the text of all local jurisdiction standards that differ from the applicable statewide code. Local jurisdictions shall not be required to conduct inspections or take any other enforcement action under the state plumbing code and state mechanical code regardless of whether the local jurisdiction has adopted by ordinance the state plumbing code or the state mechanical code.cA local jurisdiction with a population of more than fifteen thousand that has not adopted by ordinance the state plumbing code and state mechanical code shall have until December 31, 2016, to do so. Cities that have adopted a plumbing code or mechanical code as of April 26, 2013, shall have until December 31, 2016, to adopt the state plumbing code or the state mechanical code in lieu thereof.2The board shall adopt all rules necessary to carry out the licensing and other provisions of this chapter.2007 Acts, ch 198, §4; 2008 Acts, ch 1089, §10, 11; 2009 Acts, ch 151, §6; 2013 Acts, ch 77, §5, 36; 2023 Acts, ch 19, §1578105.5Examinations.1Any person desiring to take an examination for a license issued pursuant to this chapter shall make application to the board in accordance with the rules of the board. The application form shall be no longer than two pages in length, plus one security page. The board may require that a recent photograph of the applicant be attached to the application.2Applicants who fail to pass an examination shall be allowed to retake the examination at a future scheduled time.3The board shall adopt rules relating to all of the following:aThe qualifications required for applicants seeking to take examinations, which qualifications shall include a requirement that an applicant who is a contractor shall be required to provide the contractor’s state contractor registration number.bThe denial of applicants seeking to take examinations.4The board shall adopt an industry standardized examination for each license type. If a standardized examination is not available for a specified license type, the board shall work with the appropriate testing vendor to create an examination for the specified license type.2007 Acts, ch 198, §5; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §7; 2011 Acts, ch 100, §3, 15; 2013 Acts, ch 77, §6, 36Contractor registration, see chapter 91C 105.6Repealed by 2009 Acts, ch 151, §32. 105.7Repealed by 2009 Acts, ch 151, §32. 105.8Repealed by 2009 Acts, ch 151, §32. 105.9Fees.1The board shall set the fees for the examination of all applicants, by rule, which fees shall be based upon the cost of administering the examinations.2The board shall set the license fees and renewal fees for all licenses issued pursuant to this chapter, by rule.3All fees collected under this chapter shall be deposited in the licensing and regulation fund created in section 10A.507.4Nothing in this chapter shall be interpreted to prohibit the state or any of its governmental subdivisions from charging construction permit fees or inspection fees related to work performed by plumbers and mechanical professionals.5aThe board shall submit a report to the general assembly within sixty days following the end of each fiscal year. The reports shall include a balance sheet projection extending no less than three years. If the revenue projection exceeds expense projections by more than ten percent, the board shall adjust their fee schedules accordingly, so that projected revenues are no more than ten percent higher than projected expenses. The revised fees shall be implemented no later than January 1, 2013, and January 1 of each subsequent year.bA license fee for a combined license shall be the sum total of each of the separate license fees reduced by thirty percent.6The board may charge a fee for an application required by this chapter and submitted on paper if an internet application process is available.7aLicenses issued under this chapter on or after July 1, 2014, shall expire on the same renewal date every three years, beginning with June 30, 2017.bNew licenses issued after the July 1 beginning of each three-year renewal cycle shall be prorated using a one-sixth deduction for each six-month period of the renewal cycle.2007 Acts, ch 198, §9; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §8; 2011 Acts, ch 100, §4 – 6, 15; 2013 Acts, ch 77, §7, 8, 36; 2023 Acts, ch 108, §37105.10License or certification required — exceptions.1Except as provided in section 105.11, a person shall not operate as a contractor or install or repair plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic systems without obtaining a license issued by the board, or install or repair medical gas piping systems without obtaining a valid certification approved by the board.2Except as provided in section 105.11, a person shall not engage in the business of designing, installing, or repairing plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic systems unless at all times a licensed master, who shall be responsible for the proper designing, installing, and repairing of the plumbing, HVAC, refrigeration, sheet metal, or hydronic system, is employed by the person and is actively in charge of the plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic work of the person. An individual who performs such work pursuant to a business operated as a sole proprietorship shall be a licensed master in the applicable discipline.3An individual holding a master mechanical license shall not be required to get an HVAC-refrigeration, sheet metal, or hydronic license in order to design, install, or repair the work defined in this chapter as mechanical, HVAC-refrigeration, sheet metal, or hydronic work. An individual holding a journeyperson mechanical license shall not be required to get an HVAC-refrigeration, sheet metal, or hydronic license in order to install and repair the work defined in this chapter as mechanical, HVAC-refrigeration, sheet metal, or hydronic work. An individual holding a master or journeyperson mechanical license shall also not be required to obtain a special, restricted license that is designated as a sublicense of the mechanical, HVAC-refrigeration, sheet metal, or hydronic licenses.4The board shall adopt rules to allow a grace period for a contractor to operate a business described in subsection 2 without employing a licensed master.2007 Acts, ch 198, §10; 2008 Acts, ch 1032, §103, 202; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §9, 10; 2013 Acts, ch 77, §9 – 11, 36; 2013 Acts, ch 140, §56; 2014 Acts, ch 1092, §26; 2019 Acts, ch 99, §9; 2020 Acts, ch 1103, §8, 31105.11Chapter inapplicability.The provisions of this chapter shall not be construed to do any of the following:1Apply to a person licensed as an engineer pursuant to chapter 542B, licensed as a manufactured home retailer or certified as a manufactured home installer pursuant to chapter 103A, licensed as an architect pursuant to chapter 544A, or licensed as a landscape architect pursuant to chapter 544B who provides consultations or develops plans or other work concerning plumbing, HVAC, refrigeration, sheet metal, or hydronic work and who is exclusively engaged in the practice of the person’s profession.2Require employees of municipal utilities, electric membership or cooperative associations, public utility corporations, rural water associations or districts, railroads, or commercial retail or industrial companies performing manufacturing, installation, service, or repair work for such employer to hold licenses while acting within the scope of their employment. This licensing exemption does not apply to employees of a rate-regulated gas or electric public utility which provides plumbing or mechanical services as part of a systematic marketing effort, as defined pursuant to section 476.80.3Prohibit an owner of property from performing work on the owner’s principal residence, if such residence is an existing dwelling rather than new construction and is not larger than a single-family dwelling, or farm property, excluding commercial or industrial installations or installations in public use buildings or facilities, or require such owner to be licensed under this chapter. In order to qualify for inapplicability pursuant to this subsection, a residence shall qualify for the homestead tax credit.4Require that any person be a member of a labor union in order to be licensed.5Apply to a person who is qualified pursuant to administrative rules relating to the storage and handling of liquefied petroleum gases while engaged in installing, servicing, testing, replacing, or maintaining propane gas utilization equipment, or gas piping systems of which the equipment is a part, and related or connected accessory systems or equipment necessary to the operation of the equipment.6Apply to a person who meets the requirements for a certified well contractor pursuant to section 455B.190A while engaged in installing, servicing, testing, replacing, or maintaining a water system, water well, well pump, or well equipment, or piping systems of which the equipment is a part, and related or connected accessory systems or equipment necessary to the operation of the water well.7Require a helper engaged in general manual labor activities while providing assistance to an apprentice, journeyperson, or master to obtain a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic license. Experience as a helper shall not be considered as practical experience for a journeyperson license.8Apply to a person who is performing work subject to chapter 100C.9Apply to an employee of any unit of state or local government, including but not limited to cities, counties, or school corporations, performing work on a mechanical system or plumbing system, which serves a government-owned or government-leased facility while acting within the scope of the government employee’s employment.10Apply to the employees of manufacturers, manufacturer representatives, or wholesale suppliers who provide consultation or develop plans concerning plumbing, HVAC, refrigeration, sheet metal, or hydronic work, or who assist a person licensed under this chapter in the installation of mechanical or plumbing systems.11Prohibit an owner or operator of a health care facility licensed pursuant to chapter 135C, assisted living center licensed pursuant to chapter 231C, hospital licensed pursuant to chapter 135B, adult day care center licensed pursuant to chapter 231D, or a retirement facility certified pursuant to chapter 523D from performing work on the facility or requiring such owner or operator to be licensed under this chapter; except for projects that exceed the dollar amount specified as the competitive bid threshold in section 26.3.12Apply to a person who performs the laying of pipe that originates or connects to pipe in the public right-of-way or property that is intended to become public right-of-way, even if such pipe extends under the property and up to the building. However, the person shall not make any interior pipe connections within a building under this exemption. This exemption does not restrict local jurisdictions from requiring licensure under this chapter if required by local ordinance, resolution, or by bidding specification.13Prohibit a rental property owner or employee of such an owner from performing routine maintenance on the rental property.14Apply to a person who is performing work on a volunteer, non-paid basis or assisting a property owner performing non-paid work on the owner’s principal residence.2007 Acts, ch 198, §11; 2008 Acts, ch 1032, §104, 202; 2008 Acts, ch 1089, §4, 5, 10, 12; 2009 Acts, ch 151, §11 – 13; 2011 Acts, ch 100, §7, 15; 2013 Acts, ch 77, §12, 36; 2017 Acts, ch 131, §7; 2023 Acts, ch 71, §26, 48, 492023 amendment to subsection 3 applies retroactively to assessment years beginning on or after January 1, 2023; 2023 Acts, ch 71, §49105.12Form of license.1A contracting, plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic license shall be in the form of a certificate under the seal of the department, signed by the director of the department, and shall be issued in the name of the board. The license number shall be noted on the face of the license.2In addition to the certificate, the board shall provide each licensee with a wallet-sized licensing identification card.2007 Acts, ch 198, §12; 2008 Acts, ch 1089, §6, 10, 12; 2009 Acts, ch 151, §14; 2013 Acts, ch 77, §13, 36; 2023 Acts, ch 19, §1579105.13License presumptive evidence.A license issued under this chapter shall be presumptive evidence of the right of the holder to practice in this state the profession specified.2007 Acts, ch 198, §13; 2008 Acts, ch 1089, §10, 12105.14Display of contractor license.A person holding a contractor license under this chapter shall keep the current license certificate publicly displayed in the primary place in which the person practices.2007 Acts, ch 198, §14; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §15105.15Registry of licenses.The name, location, license number, and date of issuance of the license of each person to whom a license has been issued shall be entered in a registry kept in the office of the department to be known as the plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic registry. The registry may be electronic and shall be open to public inspection. However, the licensee’s home address, home telephone number, and other personal information as determined by rule shall be confidential.2007 Acts, ch 198, §15; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §16; 2013 Acts, ch 77, §14, 36105.16Change of residence.If a person licensed to practice as a contractor or a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional under this chapter changes the person’s residence or place of practice, the person shall so notify the board.2007 Acts, ch 198, §16; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §17; 2013 Acts, ch 77, §15, 36105.17Preemption of local licensing requirements.1The provisions of this chapter regarding the licensing of plumbing, mechanical, HVAC-refrigeration, sheet metal, and hydronic professionals and contractors shall supersede and preempt all plumbing, mechanical, HVAC-refrigeration, sheet metal, hydronic, and contracting licensing provisions of all governmental subdivisions.aOn July 1, 2009, all plumbing and mechanical licensing provisions promulgated by any governmental subdivision shall be null and void, except reciprocal licenses as provided in section 105.21, and of no further force and effect.bOn and after July 1, 2008, a governmental subdivision shall not prohibit a contractor or a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional licensed pursuant to this chapter from performing services for which that person is licensed pursuant to this chapter or enforce any plumbing and mechanical licensing provisions promulgated by the governmental subdivision against a person licensed pursuant to this chapter.2Nothing in this chapter shall prohibit a governmental subdivision from assessing and collecting permit fees or inspection fees related to work performed by plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professionals.2007 Acts, ch 198, §17; 2008 Acts, ch 1089, §7, 10, 12; 2009 Acts, ch 151, §18; 2013 Acts, ch 77, §16, 36105.18Qualifications and types of licenses issued.1General qualifications.The board shall adopt, by rule, general qualifications for licensure. References may be required as part of the licensing process.2Plumbing, mechanical, HVAC-refrigeration, sheet metal, and hydronic licenses and contractor licenses.The board shall issue master licenses for plumbing, mechanical, HVAC-refrigeration, and hydronic professionals. The board shall issue journeyperson licenses for plumbing, mechanical, HVAC-refrigeration, sheet metal, and hydronic professionals. A plumbing license shall allow an individual to perform work defined as plumbing. A mechanical license shall allow an individual to perform work defined as HVAC, refrigeration, sheet metal, and hydronic. An HVAC-refrigeration license shall allow an individual to perform work defined as HVAC and refrigeration. A hydronic license shall allow an individual to perform work defined as hydronic. A sheet metal license shall allow an individual to perform work defined as sheet metal. The board shall issue the separate licenses as follows:aApprentice license.In order to be licensed by the board as an apprentice, a person shall do all of the following:1File an application, which application shall establish that the person meets the minimum requirements adopted by the board.2Certify that the person will work under the supervision of a licensed journeyperson or master in the applicable discipline.3Be enrolled in an applicable apprentice program which is registered with the United States department of labor office of apprenticeship.bJourneyperson license.1In order to be licensed by the board as a journeyperson in the applicable discipline, a person shall do all of the following:aFile an application and pay application fees as established by the board, which application shall establish that the person meets the minimum educational and experience requirements adopted by the board.bPass the state journeyperson licensing examination in the applicable discipline.cProvide the board with evidence of having completed at least four years of practical experience as an apprentice. Commencing January 1, 2010, the four years of practical experience required by this subparagraph division must be an apprenticeship training program registered by the United States department of labor office of apprenticeship.2A person may simultaneously hold an active journeyperson license and an inactive master license.3An individual who has passed both the journeyperson HVAC-refrigeration examination and the journeyperson hydronic examination separately shall be qualified to be issued a journeyperson mechanical license without having to pass the journeyperson mechanical examination.cMaster license.1In order to be licensed by the board as a master, a person shall do all of the following:aFile an application and pay application fees as established by the board, which application shall establish that the person meets the minimum educational and experience requirements adopted by the board.bPass the state master licensing examination for the applicable discipline.cProvide evidence to the board that the person has previously been a licensed journeyperson or master in the applicable discipline.2An individual who has passed both the master HVAC-refrigeration examination and the master hydronic examination separately shall be qualified to be issued a master mechanical license without having to pass the master mechanical examination.dContractor license.In order to be licensed by the board as a contractor, a person shall do all of the following:1File an application and pay application fees as established by the board and establish that the person meets the minimum requirements adopted by the board. Through June 30, 2017, the application shall include the person’s state contractor registration number. After July 1, 2017, the application shall include proof of workers compensation insurance coverage, proof of unemployment insurance compliance, and, for out-of-state contractors, a bond as described in chapter 91C.2Maintain a permanent place of business.3Hold a master license or employ at least one person holding a master license under this chapter.3Combined licenses, restricted licenses.aThe board may issue single or combined licenses to persons who qualify as a contractor, master, journeyperson, or apprentice under any of the disciplines.bSpecial, restricted license. The board may by rule provide for the issuance of special plumbing and mechanical professional licenses authorizing the licensee to engage in a limited class or classes of plumbing or mechanical professional work, which class or classes shall be specified on the license. Each licensee shall have experience, acceptable to the board, in each such limited class for which the person is licensed. The board shall designate each special, restricted license to be a sublicense of either a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic license. A special, restricted license may be a sublicense of multiple types of licenses. An individual holding a master or journeyperson, plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic license shall not be required to obtain any special, restricted license which is a sublicense of the license that the individual holds. Special plumbing and mechanical professional licenses shall be issued to employees of a rate-regulated gas or electric public utility who conduct the repair of appliances. “Repair of appliances” means the repair or replacement of mechanical connections between the appliance shutoff valve and the appliance and repair of or replacement of parts to the appliance. Such special, restricted license shall require certification pursuant to industry-accredited certification standards.cThe board shall establish a special, restricted license fee at a reduced rate, consistent with any other special, restricted license fees.dAn individual that holds either a master or journeyperson mechanical license or a master or journeyperson HVAC-refrigeration license shall be exempt from having to obtain a special electrician’s license pursuant to chapter 103 in order to disconnect and reconnect existing air conditioning and refrigeration systems.4Waiver for military service.Notwithstanding section 17A.9A, the board shall waive the written examination requirements and prior experience requirements in subsection 2, paragraph “b”, subparagraph (1), and subsection 2, paragraph “c”, for a journeyperson or master license if the applicant meets all of the following requirements:aIs an active or retired member of the United States military.bProvides documentation that the applicant was deployed on active duty during any portion of the time period of July 1, 2008, through December 31, 2009.cProvides documentation that shows the applicant has previously passed an examination which the board deems substantially similar to the examination for a journeyperson license or a master license, as applicable, issued by the board, or provides documentation that shows the applicant has previously been licensed by a state or local governmental jurisdiction in the same trade and trade level.2007 Acts, ch 198, §18; 2008 Acts, ch 1032, §105, 202; 2008 Acts, ch 1089, §8, 10, 12; 2009 Acts, ch 151, §19; 2011 Acts, ch 100, §8 – 10, 15; 2013 Acts, ch 77, §17 – 23, 36; 2014 Acts, ch 1106, §20; 2015 Acts, ch 30, §38; 2019 Acts, ch 99, §10105.19Insurance and surety bond requirements.1An applicant for a contractor license or renewal of an active contractor license shall provide evidence of a public liability insurance policy and surety bond in an amount determined sufficient by the board by rule.2If the applicant is engaged in plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic work individually through a business conducted as a sole proprietorship, the applicant shall personally obtain the insurance and surety bond required by this section. If the applicant is engaged in the plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic business as an employee or owner of a legal entity, then the insurance and surety bond required by this section shall be obtained by the entity and shall cover all plumbing or mechanical work performed by the entity.3The insurance and surety bond shall be written by an entity licensed to do business in this state and each licensed contractor shall maintain on file with the board a certificate evidencing the insurance providing that the insurance or surety bond shall not be canceled without the entity first giving ten days’ written notice to the board.2007 Acts, ch 198, §19; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §20; 2013 Acts, ch 77, §24, 36105.20Renewal and reinstatement of licenses — fees and penalties — continuing education.1All licenses issued under this chapter shall be issued for a three-year period.2A license issued under this chapter may be renewed as provided by rule adopted by the board upon application by the licensee, without examination. Applications for renewal shall be made to the board, accompanied by the required renewal licensing fee, at least thirty days prior to the expiration date of the license.3Failure to renew a license within a reasonable time after the expiration of the license shall not invalidate the license, but a reasonable penalty may be assessed as adopted by rule, in addition to the license renewal fee, to allow reinstatement of the license.4The board shall, by rule, establish a reinstatement process for a licensee who allows a license to lapse, including reasonable penalties.5aThe basic continuing education requirement for renewal of a license shall be the completion, during the immediately preceding license term, of the number of classroom hours of instruction required by the board in courses or seminars which have been approved by the board. The board shall require at least eight classroom hours of instruction during each three-year licensing term.bA licensee shall have a thirty-day grace period after expiration of the licensing term to complete all requirements necessary for license renewal without penalty.2007 Acts, ch 198, §20; 2008 Acts, ch 1089, §9, 10, 12; 2009 Acts, ch 151, §21; 2011 Acts, ch 100, §11, 12, 15; 2013 Acts, ch 77, §25, 36; 2024 Acts, ch 1169, §26105.21Reciprocal licenses.The board may license without examination a nonresident applicant who is licensed under plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional licensing statutes of another state having similar licensing requirements as those set forth in this chapter and the rules adopted under this chapter if the other state grants the same reciprocal licensing privileges to residents of Iowa who have obtained Iowa plumbing or mechanical professional licenses under this chapter. The board shall adopt the necessary rules, not inconsistent with the law, for carrying out the reciprocal relations with other states which are authorized by this chapter.2007 Acts, ch 198, §21; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §22; 2013 Acts, ch 77, §26, 36105.22Grounds for denial, revocation, or suspension of license.A license to practice as a contractor or as a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional may be revoked or suspended, or an application for licensure may be denied pursuant to procedures established pursuant to chapter 272C by the board, or the licensee may be otherwise disciplined in accordance with that chapter, when the licensee commits any of the following acts or offenses:1Fraud in procuring a license.2Professional incompetence.3Knowingly making misleading, deceptive, untrue, or fraudulent misrepresentations in the practice of the profession or engaging in unethical conduct or practice harmful or detrimental to the public. Proof of actual injury need not be established.4Fraud in representations as to skill or ability.5Use of untruthful or improbable statements in advertisements.6Willful or repeated violations of this chapter.7Aiding and abetting a person who is not licensed pursuant to this chapter in that person’s pursuit of an unauthorized and unlicensed plumbing, mechanical, HVAC, refrigeration, sheet metal, or hydronic professional practice.8Failure to meet the commonly accepted standards of professional competence.9Any other such grounds as established by rule by the board.2007 Acts, ch 198, §22; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §23, 34; 2013 Acts, ch 77, §27, 28, 36; 2018 Acts, ch 1026, §37; 2019 Acts, ch 99, §11; 2020 Acts, ch 1103, §9, 31105.23Jurisdiction of revocation and suspension proceedings.The board shall have exclusive jurisdiction of all proceedings to revoke or suspend a license issued pursuant to this chapter. The board may initiate proceedings under this chapter or chapter 272C, following procedures set out in section 272C.6, either on its own motion or on the complaint of any person. The board, in connection with a proceeding under this chapter, may issue subpoenas to compel attendance and testimony of witnesses and the disclosure of evidence, and may request the attorney general to bring an action to enforce the subpoena.2007 Acts, ch 198, §23; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §24, 34105.24Notice and default.1A written notice stating the nature of the charge or charges against a licensee and the time and place of the hearing before the board on the charges shall be served on the licensee not less than thirty days prior to the date of hearing either personally or by mailing a copy by certified mail to the last known address of the licensee.2If, after having been served with the notice of hearing, the licensee fails to appear at the hearing, the board may proceed to hear evidence against the licensee and may enter such order as is justified by the evidence.2007 Acts, ch 198, §24; 2008 Acts, ch 1089, §10, 12105.25Advertising violations penalties.1Only a person who is duly licensed pursuant to this chapter may advertise the fact that the person is licensed as a contractor or as a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional by the state of Iowa.2All written advertisements distributed in this state by a person who is engaged in the business of designing, installing, or repairing plumbing, HVAC, refrigeration, sheet metal, or hydronic systems shall include the listing of the contractor license number, as applicable. 3A person who fraudulently claims to be a licensed contractor or a licensed plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional pursuant to this chapter, either in writing, cards, signs, circulars, advertisements, or other communications, is guilty of a simple misdemeanor.4A person who fraudulently lists a license number in connection with that person’s advertising or falsely displays a license number is guilty of a simple misdemeanor.2007 Acts, ch 198, §25; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §25, 34; 2013 Acts, ch 77, §29, 36105.26Injunction.A person engaging in any business or in the practice of any profession for which a license is required by this chapter without such license may be restrained by injunction.2007 Acts, ch 198, §26; 2008 Acts, ch 1089, §10, 12105.27Civil penalty.1In addition to any other penalties provided for in this chapter, the board may, by order, impose a civil penalty, not to exceed five thousand dollars per offense, upon a person violating any provision of this chapter. Each day of a continued violation constitutes a separate offense, except that offenses resulting from the same or common facts or circumstances shall be considered a single offense. Before issuing an order under this section, the board shall provide the person written notice and the opportunity to request a hearing on the record. The hearing must be requested within thirty days of the issuance of the notice.2A person aggrieved by the imposition of a civil penalty under this section may seek judicial review in accordance with section 17A.19.3If a person fails to pay a civil penalty within thirty days after entry of an order under subsection 1 or, if the order is stayed pending an appeal, within ten days after the court enters a final judgment in favor of the board, the board shall notify the attorney general. The attorney general may commence an action to recover the amount of the penalty, including reasonable attorney fees and costs.4An action to enforce an order under this section may be joined with an action for an injunction.2007 Acts, ch 198, §27; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §26, 34105.28Enforcement.The board shall enforce the provisions of this chapter. Every licensee and member of the board shall furnish the board such evidence as the licensee or member may have relative to any alleged violation which is being investigated.2007 Acts, ch 198, §28; 2008 Acts, ch 1089, §10, 13; 2009 Acts, ch 151, §27, 34105.29Report of violators.Every licensee and every member of the board shall report to the board the name of every person who is practicing as a contractor or as a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional without a license issued pursuant to this chapter pursuant to the knowledge or reasonable belief of the person making the report. The opening of an office or place of business for the purpose of providing any services for which a license is required by this chapter, the announcing to the public in any way the intention to provide any such service, the use of any professional designation, or the use of any sign, card, circular, device, vehicle, or advertisement, as a provider of any such services shall be prima facie evidence of engaging in the practice of a contractor or a plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic professional.2007 Acts, ch 198, §29; 2008 Acts, ch 1089, §10, 13; 2009 Acts, ch 151, §28, 34; 2013 Acts, ch 77, §30, 36105.30Attorney general.Upon request of the board, the attorney general shall institute in the name of the state the proper proceedings against any person charged by the department with violating any provision of this chapter.2007 Acts, ch 198, §30; 2008 Acts, ch 1089, §10, 12; 2009 Acts, ch 151, §29, 34105.31License renewal and reissuance transition provisions.Repealed by 2018 Acts, ch 1026, §180.105.32Voluntary early renewal of license.Repealed by 2018 Acts, ch 1026, §180.