567—122.14 (455B,455D) Operational requirements for permitted CRT recycling facilities.
	 122.14(1) Collection requirements for CRTs. All discarded CRTs coming into the CRT recycling facility shall be collected in a manner that complies with the following requirements:
	  a.   	 Collection activities for discarded CRTs shall occur in an area and through a process that minimizes the risk of hazardous conditions.
	  b.   	 Discarded CRTs shall be collected and contained in a manner that is structurally adequate to prevent breakage and spillage under normal operating conditions, and that is compatible with the contents.
	  c.   	 CRT glass and CRTs that show evidence of breakage, leakage, or damage that could cause the release of lead or other hazardous constituents into the environment shall be collected in enclosed and separate containers from other discarded CRTs.
	 122.14(2) Transportation requirements for CRTs. All discarded CRTs leaving the CRT recycling facility shall be transported in a manner that complies with the following requirements:
	  a.   	 Discarded CRTs shall be transported in a contained manner that is structurally adequate to prevent breakage and spillage under normal operating conditions, and that is compatible with the contents.
	  b.   	 Containers or packages shall be labeled. Labeling shall specify the contents (e.g., CRTs, nonintact CRTs), point of origin, destination, and shipment date.
	  c.   	 CRT glass and CRTs that show evidence of breakage, leakage, or damage that could cause the release of lead or other hazardous constituents into the environment shall be transported in enclosed and separate containers from other discarded CRTs.
	  d.   	 Discarded CRTs shall be transported in compliance with state and federal Department of Transportation (DOT) regulations.
	 122.14(3) General operating requirements. All CRT recycling facilities shall comply with the following requirements:
	  a.   	 CRT refurbishing, CRT demanufacturing, and CRT processing shall be done in a specifically designated location within a facility.
	  b.   	 Working conditions shall be in compliance with state and federal worker safety requirements.