875—61.5 (88A) Amusement inspection sticker. Covered equipment shall not be operated without a current sticker.
	   61.5(1) After covered equipment has passed an annual inspection by the division of labor services inspector, the division of labor services inspector shall affix an amusement inspection sticker to a basic part of the covered equipment in such a manner as to be readily accessible by the inspector.
	   61.5(2) After the commissioner receives satisfactory proof of inspection from an owner designated by the labor commissioner pursuant to paragraph 61.4(1)“a,” the commissioner shall mail the sticker to the owner. The owner shall properly affix the sticker to a basic part of the air-supported structure or blower before operation.
	   61.5(3) After covered equipment passes a major-modification inspection, a new amusement inspection sticker will be issued.
	   61.5(4) Before covered equipment is sold, the seller shall remove the amusement inspection sticker. If a current amusement inspection sticker is no longer legible, the operator may request a replacement sticker.
[ARC 2428C, IAB 3/2/16, effective 4/6/16; see Delay note at end of chapter]