215.17  Test weights to be used.
  1.  A person engaged in scale repair work for hire shall use only test weights sealed by the department in determining the effectiveness of repair work and the test weights shall be sealed as to their accuracy once each year. However, a person shall not claim to be an official scale inspector and shall not use the test weights except to determine the accuracy of scale repair work done by the person and the person shall not be entitled to a fee for their use. A fee shall be charged and collected at time of inspection for the inspection of such weights as follows:
All weights up to and including 25

  pounds$   1.10 each

 Over 25 pounds capacity,

  up to and including 50 pounds    2.25 each

 Over 50 pounds capacity, up to and

  including 100 pounds    3.00 each

 Over 100 pounds capacity, up to

  and including 500 pounds    4.50 each

 Over 500 pounds capacity, up to

  and including 1,000 pounds    7.50 each
  2.  The fee for all tank calibrations shall be as follows:
100 gallons up to and including

  300 gallons$  4.50

 301 gallons up to and including

  500 gallons    7.50

 501 gallons up to and including

  1,000 gallons  11.25

 1,001 gallons up to and including

  2,000 gallons  15.00

 2,001 gallons up to and including

  3,000 gallons  18.00

 3,001 gallons up to and including

  4,000 gallons  21.00

 4,001 gallons up to and including

  5,000 gallons  24.00

 5,001 gallons up to and including

  6,000 gallons  27.00

 6,001 gallons up to and including

  7,000 gallons  30.00

 7,001 gallons and up  37.50
  3.  Calibration shall not be required of a tank which is not used for the purpose of measuring, or which is equipped with a meter, and vehicle tanks loaded from meters and carrying a printed ticket showing gallonage shall not be required to be calibrated.
[C50, 54, 58, 62, 66, 71, 73, 75, 77, 79, 81, §215.17]
92 Acts, ch 1239, §39; 2010 Acts, ch 1061, §41