567—118.6 (455B,455D) Appliance demanufacturing permit application requirements. The permit application for appliance demanufacturing must contain the following information to be submitted on Form 542-8005.
	  1. 	 Facility name.
	  2. 	 Office address.
	  3. 	 Location of demanufacturing facility if different from office address.
	  4. 	 Contact person or official responsible for the operation of the facility.
	  5. 	 Type, source and expected number or weight of appliances to be handled per year.
	  6. 	 Schematic site plans of a fixed facility, including the schematic floor plans of any buildings showing where activities will take place and where waste is stored.
	  7. 	 For mobile operations: schematic plans, or a description and photographs, of the mobile van or trailer.
	  8. 	 A copy of the EPA Refrigerant Recovery or Recycling Device Acquisition Certification Form 2060-0256.
	  9. 	 Operation plan: a detailed summary of the activities that will be performed on each type of appliance considered for demanufacturing. This summary must include step-by-step activities of the demanufacturing process.
	  10. 	 A contingency plan detailing specific procedures to be used in case of equipment breakdown or fire, including methods to be used to remove or dispose of accumulated waste.
	  11. 	 A copy of the Authorization to Discharge (Stormwater) Permit number, where applicable.
	  12. 	 A copy of EPA Notification of PCB Activity Form 7710-53 and a return response from EPA. Facilities storing PCB-containing articles longer than 30 days must register with EPA. This form may be obtained by contacting the Fibers and Organics Branch, Office of Pollution Prevention and Toxics, United States Environmental Protection Agency, Ariel Rios Building (7404), 1200 Pennsylvania Avenue NW, Washington, DC 20460.
	  13. 	 Documentation showing compliance with rule 118.8(455B,455D).
	  14. 	 A copy of the unique marking system to be applied to each discarded appliance after demanufacturing.
	  15. 	 Documentation that a permanent facility meets local zoning requirements.